|
|
Post by RC Tractor Guy on Apr 8, 2013 15:41:38 GMT
Does anyone have any questions about my Massey 8680 RC conversion? If you want close up pictures of anything or just want to know how I done anything then post your question here.
|
|
|
|
Post by WilliWonka on May 5, 2013 21:02:10 GMT
how did you make your receiver
|
|
|
|
Post by RC Tractor Guy on May 6, 2013 9:40:40 GMT
Welcome to the forum, I put an xbee module in the cab of the tractor and a matching one in the controller. They communicate with a microchip using UART which is probably the easiest way to send data using an Arduino anyway as there are plenty of examples. Once you have the xbees set up they effectively become an invisible wire between the two chips. Does that answer your question?
|
|
|
|
Post by thomas on Jul 16, 2014 19:59:25 GMT
have you any pictures of the inside of the massy . and are siku tractors and the siku rc ones the same on the inside thanks . only have britains non rc tractor
|
|
|
|
Post by RC Tractor Guy on Jul 16, 2014 21:34:33 GMT
Well the Scania appeared to be designed for rc so I'd guess any control 32 models would be the same. I don't have any pictures here I'll take a few at the weekend if I remember.
|
|
|
|
Post by sahil on Jul 12, 2015 7:33:25 GMT
Hey...
How can i buy this massey 8680..online?
|
|
|
|
Post by RC Tractor Guy on Jul 12, 2015 20:49:07 GMT
Hi, I made the radio controlled 8680 model and it's not for sale but if you wanted to make your own you can find the static model on ebay here. |
|
|
|
Post by sahil on Jul 13, 2015 3:00:28 GMT
Thanku so much..
|
|
|
|
Post by bojalol on Aug 28, 2019 4:34:09 GMT
|
|
|
|
Post by asqeado on Aug 28, 2019 6:50:11 GMT
|
|
