|
Post by Acatalioto on Jan 20, 2015 22:09:07 GMT
Any progress on PC 400
|
|
|
Post by RC Tractor Guy on Jan 21, 2015 14:55:24 GMT
I recorded the rest of the boom build over Christmas. I was putting together the videos last night to get them ready for editing and I don't remember seeing that one so I'll check tonight and if I find it I'll upload it ready for next weeks video.
I also got some gears to work for the slew ring and mounted the larger one to the undercarriage of the excavator but I still need to finish mounting the slew motor.
|
|
|
Post by RC Tractor Guy on Jan 28, 2015 15:19:17 GMT
Here is the latest update on the PC400 RC conversion, mount the N20 motors to the excavator boom and get them working in this vid.
|
|
|
Post by PC 400 on Feb 5, 2015 16:57:46 GMT
When will the slewing be ready
|
|
|
Post by RC Tractor Guy on Feb 5, 2015 17:16:07 GMT
It will probably be a few weeks before I get round to working on the PC400 again. I'm working on the controller at the minute and getting code to communicate with the NRF24 modules so that will be the next video.
|
|
|
Post by Pc400 on Feb 6, 2015 14:12:23 GMT
Where will you get the ring gear and slip gear and motor for rotating the machine
|
|
|
Post by RC Tractor Guy on Feb 6, 2015 14:40:54 GMT
I'm using an N20 gear motor for the slewing, not sure what rpm yet. The gears are the blue ones in this video.
I got the motors and gears on ebay.
|
|